Our 800 Ton is still under development.
| Operating Specifications | |
| Max Tonnage Maximum force generated by the upper arm. | 800 tons |
| Upper Ram Retract Force Maximum force generated by the upper ram during retraction.@1,450 psi | 128 tons |
| Upper Ram Stroke Max stroke of the upper ram hydraulic cylinder from fully down to fully retracted. | 16″ |
| Lower Ram Counter Pressure Max amount of force that holds the die table up.@3000 psi | 471 tons |
| Lower Ram Withdrawal Pressure Maximum machine force available to strip the part out of the die after compaction.@3000 psi | 302 tons |
| Fill Depth Depth of the space that is capable of being filled with powder material. | 0-10″ |
| Oil Reservoir Capacity Size of hydraulic oil reserve storage tank. | 800 gal |
| High Pressure Pressure available to generate 15 tons of force. | 3537 psi |
| Low Pressure Pressure required for rapid movement of main cylinders. | 800 psi |
| Pilot Oil Pressure 500 psi used to control auxiliary equipment and valves. | 500 psi |
| Max Upper Ram Down Speed The maximum rapid traverse positioning speed of the upper ram to move into position. | 11.4″/sec |
| Max Upper Ram Up Speed The maximum rapid traverse positioning speed of the upper ram to retract it. | 14.5″/sec |
| Max Pressing Speed The maximum speed available during the actual compaction stroke. | 2.3″/sec |
| Max Lower Ram Up Speed The maximum speed available to lift the lower ram up and into position. | 9.3″/sec |
| Max Lower Ram Down Speed The maximum speed available to retract the lower ram down and out of position. | 5.2″/sec |
| Max Cycle Rate (0.7″ fill) The maximum attainable cycle rate with a 0.7″ fill operation. | 21/min |
| Electric Motor Hydraulic pump motor size.*w/ PL/CP | (2) 100/75 hp* 50 hp |
| Control System Voltage Voltage provided to and employed by the control system. | 120 VAC |
| Electrical Service Required (3 phase) Type and capacity of the electric supply needed.*w/ PL/CP | 480V/335A* 60A |
| Standard Die Size Diameter of the die the press accepts for standard applications. | 16″ dia |
| Feeder Stroke The amount of shakes the feeder box has over the die cavity. | 16″ |
| Feeder Box Size The diameter fo the opening that travels over the die cavity to fill the die with powder. | 10″ dia |
| Powder Hopper Capacity Size of the powder supply hopper. | 25 gal |
| Dimensions | |
| Overall Height | 227″ |
| Overall Width | 128″ |
| Overall Depth | 230″ |
| Frame Base Depth | 106″ |
| Power Unit Base Depth | 102″ |
| Power Unit Height | 86″ |
| Platform Height (or) Pit Depth | 48″ |
| Working Height | 50″ |
| Frame Weight (Loaded) | 100,000 lbs |
| Power Unit Weight | 32,000 lbs |