550 Ton CNC Powder Press

Our 550 Ton CNC Powder Press comes standard with a pre-fill tank and jack ram for rapid motion of the upper ram as well as several other standard features and options. including:

  • A high-flow/low-pressure double pump for rapid movements of the main rams and pilot pressure.
  • A power unit that is separate from the frame.
  • The capacity for a 10″ fill, 14″ die.
  • A resolution in increments of 0.1 tons.
  • A pre-lift max holding force of 396 tons.
  • An optional CNC closed-loop core pin or core pin/secondary lower punch combo is available. (This secondary lower punch has an independent dedicated pump and motor.)
  • Rear access to the back of tooling between frame and tank.
  • A minimal footprint requiring a mere 38″ pit or platform.