150 Ton CNC Powder Compacting Press
Our 150 Ton CNC Powder Press features a high flow/low pressure double pump for rapid movements of the main rams and pilot pressure as well as a host of other standard features and options including:
- a power unit that is separate from the frame
- the capacity for a 10" fill, 10" die
- a resolution in increments of .1 tons
- a prelift max holding force of 106.9 tons
- an optinoal CNC closed loop core pin or core pin/secondary lower punch combo is available (this secondary lower punch has an independent dedicated pump and motor)
- rear access to back of tooling between frame and tank
- a minimal footperint and 30" pit or platform requirement
PM-150 Specifications |
PM-150 |
Max Tonnage
|
150 tons |
Upper Ram Retract Force |
15 tons |
Upper Ram Stroke |
16" |
Lower Ram Counter Pressure |
120 tons |
Lower Ram Withdrawal Pressure |
82 tons |
Fill Depth |
0-10" |
Oil Reservoir Capacity |
280 gal |
High Pressure |
3820 psi |
Low Pressure |
800 psi |
Pilot Oil Pressure |
500 psi |
Max Upper Ram Down Speed |
7.2"/sec |
Max Upper Ram Up Speed |
12.9"/sec |
Max Pressing Speed |
3.4"/sec |
Max Lower Ram Up Speed |
9.3"/sec |
Max Lower Ram Down Speed |
13.4"/sec |
Max Cycle Rate (.7" fill) |
32/min |
Electric Motor |
40 hp |
Control System Voltage |
120 VAC |
Electrical Service Required |
440V/60A |
Standard Die Size |
10" dia |
Feeder Stroke |
12" |
Feeder Box Size |
8" dia |
Powder Hopper Capacity |
10 gal |
|
PM-150 Dimensions |
PM-150 |
Frame Width
|
66" |
Height |
134" |
Depth |
92" |
Platform Height (or) Pit Depth |
30" |
Tank Height |
67" |
Power Unit Depth |
40" |
Power Unit Height |
95" |
Working Height |
39" |
Overall Width |
106" |
Frame Base Width |
100" |
Frame Depth |
52" |
Frame Opening |
36" |
Frame Weight |
18,000 lbs |
Power Unit Weight |
6,000 lbs |
|