Our 15 Ton CNC Powder Press may be the smallest in our line, but it still packs an incredible array of standard features and options. This press is especially accurate in its tolerances, and handles even the most intricate press work with amazing precision.
Here are some of the highlights of our PM-15 Digital CNC Powder Compacting Press:
- It produces a better parts rate.
- It has been designed specifically for single level but it can have 2 levels with a flanged die.
- An open-loop core pin is standard.
- A CNC closed-loop core pin is available as an option.
- It has all the intricate functionality of the larger presses.
- It has a smaller footprint and does not need a pit or platform.
- It allows for a 7″ fill, 6″ die with lots of daylight.
- It offers incredibly high resolution with increments of .010 tons.
| Operating Specifications | |
| Max Tonnage Maximum force generated by the upper arm. | 15 tons |
| Upper Ram Retract Force Maximum force generated by the upper ram during retraction. | 3 tons |
| Upper Ram Stroke Max stroke of the upper ram hydraulic cylinder from fully down to fully retracted. | 12″ |
| Lower Ram Counter Pressure Max amount of force that holds the die table up. | 9 tons |
| Lower Ram Withdrawal Pressure Maximum machine force available to strip the part out of the die after compaction. | 9 tons |
| Fill Depth Depth of the space that is capable of being filled with powder material. | 0-7″ |
| Oil Reservoir Capacity Size of hydraulic oil reserve storage tank. | 60 gal |
| High Pressure Pressure available to generate 15 tons of force. | 3616 psi |
| Low Pressure Pressure required for rapid movement of main cylinders. | N/A |
| Pilot Oil Pressure 500 psi used to control auxiliary equipment and valves. | 500 psi |
| Max Upper Ram Down Speed The maximum rapid traverse positioning speed of the upper ram to move into position. | 12.4″/sec |
| Max Upper Ram Up Speed The maximum rapid traverse positioning speed of the upper ram to retract it. | 14.2″/sec |
| Max Pressing Speed The maximum speed available during the actual compaction stroke. | 6.6″/sec |
| Max Lower Ram Up Speed The maximum speed available to lift the lower ram up and into position. | 9.3″/sec |
| Max Lower Ram Down Speed The maximum speed available to retract the lower ram down and out of position. | 9.3″/sec |
| Max Cycle Rate (0.7″ fill) The maximum attainable cycle rate with a 0.7″ fill operation. | 52/min |
| Electric Motor Hydraulic pump motor size. | 15 hp |
| Control System Voltage Voltage provided to and employed by the control system. | 120 VAC |
| Electrical Service Required (3 phase) Type and capacity of the electric supply needed. | 440V/14A |
| Standard Die Size Diameter of the die the press accepts for standard applications. | 6″ dia |
| Feeder Stroke The amount of shakes the feeder box has over the die cavity. | 8″ |
| Feeder Box Size The diameter fo the opening that travels over the die cavity to fill the die with powder. | 4″ dia |
| Powder Hopper Capacity Size of the powder supply hopper. | 10 gal |
| Dimensions | |
| Frame Width | 27″ |
| Height | 85″ |
| Depth | 58″ |
| Platform Height (or) Pit Depth | —- |
| Tank Height | 35″ |
| Power Unit Depth | —- |
| Power Unit Height | 54″ |
| Working Height | 45″ |
| Overall Width | 62″ |
| Frame Base Width | 56″ |
| Frame Depth | —- |
| Frame Opening | 18″ |
| Frame Weight | 5,000 lbs |
| Power Unit Weight | —- |