• Increase font size
  • Default font size
  • Decrease font size

250 Ton CNC Powder Press

Our 250 Ton CNC Powder Press offers a high flow/low pressure double pump for rapid movements of the main rams and pilot pressure, as well as a long list of  standard features and options including:

  • a power unit separate from the frame
  • the capacity of 10" fill, 12" die
  • a resolution is increments of 1 tons
  • a prelift max holding force of 181 tons
  • an optional CNC closed loop core pin or core pin/secondary lower punch combo is available (this secondary lower punch has an independent dedicated pump and motor)
  • rear access to back of tooling between frame and tank
  • a minimal 36" pit or platform requirement


 PM-250 Specifications PM-250

Max Tonnage

 250 tons
Upper Ram Retract Force 20 tons
Upper Ram Stroke 16"
Lower Ram Counter Pressure 200 tons
Lower Ram Withdrawal Pressure 124 tons
Fill Depth 0-10"
Oil Reservoir Capacity 400 gal
High Pressure 3767 psi
Low Pressure 800 psi
Pilot Oil Pressure 500 psi
Max Upper Ram Down Speed 5.7"/sec
Max Upper Ram Up Speed 8.3"/sec
Max Pressing Speed 2.8"/sec
Max Lower Ram Up Speed 7.0"/sec
Max Lower Ram Down Speed 4.3"/sec
Max Cycle Rate (.7" fill) 29/min
Electric Motor 65 hp
Control System Voltage 120 VAC
Electrical Service Required  440V/84A
Standard Die Size 12" dia
Feeder Stroke 12"
Feeder Box Size 8" dia
Powder Hopper Capacity 25 gal
 PM-250 Dimensions PM-250

Frame Width

Height 185"
Depth 119"
Platform Height (or) Pit Depth 36"
Tank Height 76"
Power Unit Depth 56"
Power Unit Height 113"
Working Height 43"
Overall Width 108"
Frame Base Width 100"
Frame Depth 52"
Frame Opening 36"
Frame Weight 26,00 lbs
Power Unit Weight 9,000 lbs

We are at your service

For additional information about our great equipment and services, feel free to give us a call or contact us. We are ready and able to apply our expertise and help you solve your manufacturing challenge.