• Increase font size
  • Default font size
  • Decrease font size

150 Ton CNC Powder Press

Our 150 Ton CNC Powder Press features a high flow/low pressure double pump for rapid movements of the main rams and pilot pressure as well as a host of other standard features and options including:

  • a power unit that is separate from the frame
  • the capacity for a 10" fill, 10" die
  • a resolution in increments of .1 tons
  • a prelift max holding force of 106.9 tons
  • an optinoal CNC closed loop core pin or core pin/secondary lower punch combo is available (this secondary lower punch has an independent dedicated pump and motor)
  • rear access to back of tooling between frame and tank
  • a minimal footperint and 30" pit or platform requirement

 

 PM-150 Specifications PM-150

Max Tonnage

 150 tons
Upper Ram Retract Force 15 tons
Upper Ram Stroke 16"
Lower Ram Counter Pressure 120 tons
Lower Ram Withdrawal Pressure 82 tons
Fill Depth 0-10"
Oil Reservoir Capacity 280 gal
High Pressure 3820 psi
Low Pressure 800 psi
Pilot Oil Pressure 500 psi
Max Upper Ram Down Speed 7.2"/sec
Max Upper Ram Up Speed 12.9"/sec
Max Pressing Speed 3.4"/sec
Max Lower Ram Up Speed 9.3"/sec
Max Lower Ram Down Speed 13.4"/sec
Max Cycle Rate (.7" fill) 32/min
Electric Motor 40 hp
Control System Voltage 120 VAC
Electrical Service Required  440V/60A
Standard Die Size 10" dia
Feeder Stroke 12"
Feeder Box Size 8" dia
Powder Hopper Capacity 10 gal
 PM-150 Dimensions PM-150

Frame Width

66"
Height 134"
Depth 92"
Platform Height (or) Pit Depth 30"
Tank Height 67"
Power Unit Depth 40"
Power Unit Height 95"
Working Height 39"
Overall Width 106"
Frame Base Width 100"
Frame Depth 52"
Frame Opening 36"
Frame Weight 18,000 lbs
Power Unit Weight 6,000 lbs

We are at your service

For additional information about our great equipment and services, feel free to give us a call or contact us. We are ready and able to apply our expertise and help you solve your manufacturing challenge.