Thursday, 02 July 2020
A+ R A-

550 Ton CNC Powder Compacting Press

Our 550 Ton CNC Powder Press comes standard with a pre-fill tank and jack ram for rapid motion of upper ram as well as several other standard features and options. including:

  • a high flow/low pressure double pump for rapid movements of the main rams and pilot pressure
  • a power unit that is separate from the frame
  • the capacity for a 10" fill, 14" die
  • a resolution in increments of 1 tons
  • a prelift max holding force of 396 tons
  • an optional CNC closed loop core pin or core pin/secondary lower punch combo is available (this secondary lower punch has an independent dedicated pump and motor)
  • rear access to back of tooling between frame and tank
  • a minimal footprint requiring a mere 38" pit or platform


 PM-550 Specifications PM-550

Max Tonnage

 550 tons
Upper Ram Retract Force 30 tons
Upper Ram Stroke 16"
Lower Ram Counter Pressure 301 tons
Lower Ram Withdrawal Pressure 206 tons
Fill Depth 0-10"
Oil Reservoir Capacity 650 gal
High Pressure 3880 psi
Low Pressure 800 psi
Pilot Oil Pressure 500 psi
Max Upper Ram Down Speed 7.0"/sec
Max Upper Ram Up Speed 10.8"/sec
Max Pressing Speed 2.2"/sec
Max Lower Ram Up Speed 9.6"/sec
Max Lower Ram Down Speed 4.5"/sec
Max Cycle Rate (.7" fill) 25/min
Electric Motor 75 hp & 50 hp
Control System Voltage 120 VAC
Electrical Service Required  440V/150A
Standard Die Size 14" dia
Feeder Stroke 14"
Feeder Box Size 4" dia
Powder Hopper Capacity 50 gal
 PM-550 Dimensions PM-550

Frame Width

Height 190"
Depth 133"
Platform Height (or) Pit Depth 38"
Tank Height 83"
Power Unit Depth 83"
Power Unit Height 83"
Working Height 44"
Overall Width 116"
Frame Base Width 108"
Frame Depth 70"
Frame Opening 40"
Frame Weight 53,000 lbs
Power Unit Weight 15,000 lbs



footer 2


Digital Press USA
90 South Commerce Way Suite 340
Bethlehem, Pennsylvania 18017

Footer 3


Telephone: +1.610.758.9680
Fax: +1.610.758.8510